DecayingEstimatedHistogramReservoir.java
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.cassandra.metrics;
import java.io.OutputStream;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import java.nio.charset.StandardCharsets;
import java.util.Arrays;
import java.util.Objects;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.atomic.AtomicBoolean;
import java.util.concurrent.atomic.AtomicLongArray;
import com.google.common.annotations.VisibleForTesting;
import com.google.common.primitives.Ints;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import com.codahale.metrics.Reservoir;
import com.codahale.metrics.Snapshot;
import org.apache.cassandra.utils.EstimatedHistogram;
import org.apache.cassandra.utils.MonotonicClock;
import org.apache.cassandra.utils.NoSpamLogger;
import static java.lang.Math.max;
import static java.lang.Math.min;
import static org.apache.cassandra.config.CassandraRelevantProperties.DECAYING_ESTIMATED_HISTOGRAM_RESERVOIR_STRIPE_COUNT;
/**
* A decaying histogram reservoir where values collected during each minute will be twice as significant as the values
* collected in the previous minute. Measured values are collected in variable sized buckets, using small buckets in the
* lower range and larger buckets in the upper range. Use this histogram when you want to know if the distribution of
* the underlying data stream has changed recently and you want high resolution on values in the lower range.
* <p/>
* The histogram use forward decay [1] to make recent values more significant. The forward decay factor will be doubled
* every minute (half-life time set to 60 seconds) [2]. The forward decay landmark is reset every 30 minutes (or at
* first read/update after 30 minutes). During landmark reset, updates and reads in the reservoir will be blocked in a
* fashion similar to the one used in the metrics library [3]. The 30 minute rescale interval is used based on the
* assumption that in an extreme case we would have to collect a metric 1M times for a single bucket each second. By the
* end of the 30:th minute all collected values will roughly add up to 1.000.000 * 60 * pow(2, 30) which can be
* represented with 56 bits giving us some head room in a signed 64 bit long.
* <p/>
* Internally two reservoirs are maintained, one with decay and one without decay. All public getters in a {@link Snapshot}
* will expose the decay functionality with the exception of the {@link Snapshot#getValues()} which will return values
* from the reservoir without decay. This makes it possible for the caller to maintain precise deltas in an interval of
* its choice.
* <p/>
* The bucket size starts at 1 and grows by 1.2 each time (rounding and removing duplicates). It goes from 1 to around
* 18T by default (creating 164+1 buckets), which will give a timing resolution from microseconds to roughly 210 days,
* with less precision as the numbers get larger.
* <p/>
* The series of values to which the counts in `decayingBuckets` correspond:
* 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17, 20, 24, 29, 35, 42, 50, 60, 72 etc.
* Thus, a `decayingBuckets` of [0, 0, 1, 10] would mean we had seen 1 value of 3 and 10 values of 4.
* <p/>
* Each bucket represents values from (previous bucket offset, current offset].
* <p/>
* To reduce contention each logical bucket is striped accross a configurable number of stripes (default: 2). Threads are
* assigned to specific stripes. In addition, logical buckets are distributed across the physical storage to reduce conention
* when logically adjacent buckets are updated. See CASSANDRA-15213.
* <p/>
* <ul>
* <li>[1]: http://dimacs.rutgers.edu/~graham/pubs/papers/fwddecay.pdf</li>
* <li>[2]: https://en.wikipedia.org/wiki/Half-life</li>
* <li>[3]: https://github.com/dropwizard/metrics/blob/v3.1.2/metrics-core/src/main/java/com/codahale/metrics/ExponentiallyDecayingReservoir.java</li>
* </ul>
*/
public class DecayingEstimatedHistogramReservoir implements SnapshottingReservoir
{
private static final Logger logger = LoggerFactory.getLogger(DecayingEstimatedHistogramReservoir.class);
private static final NoSpamLogger noSpamLogger = NoSpamLogger.getLogger(logger, 5L, TimeUnit.MINUTES);
/**
* The default number of decayingBuckets. Use this bucket count to reduce memory allocation for bucket offsets.
*/
public static final int DEFAULT_BUCKET_COUNT = 164;
public static final int LOW_BUCKET_COUNT = 127;
public static final int DEFAULT_STRIPE_COUNT = DECAYING_ESTIMATED_HISTOGRAM_RESERVOIR_STRIPE_COUNT.getInt();
public static final int MAX_BUCKET_COUNT = 237;
public static final boolean DEFAULT_ZERO_CONSIDERATION = false;
private static final int[] DISTRIBUTION_PRIMES = new int[] { 17, 19, 23, 29 };
// The offsets used with a default sized bucket array without a separate bucket for zero values.
public static final long[] DEFAULT_WITHOUT_ZERO_BUCKET_OFFSETS = EstimatedHistogram.newOffsets(DEFAULT_BUCKET_COUNT, false);
// The offsets used with a default sized bucket array with a separate bucket for zero values.
public static final long[] DEFAULT_WITH_ZERO_BUCKET_OFFSETS = EstimatedHistogram.newOffsets(DEFAULT_BUCKET_COUNT, true);
private static final int TABLE_BITS = 4;
private static final int TABLE_MASK = -1 >>> (32 - TABLE_BITS);
private static final float[] LOG2_TABLE = computeTable(TABLE_BITS);
private static final float log2_12_recp = (float) (1d / slowLog2(1.2d));
private static float[] computeTable(int bits)
{
float[] table = new float[1 << bits];
for (int i = 1 ; i < 1<<bits ; ++i)
table[i] = (float) slowLog2(ratio(i, bits));
return table;
}
public static float fastLog12(long v)
{
return fastLog2(v) * log2_12_recp;
}
// returns 0 for all inputs <= 1
private static float fastLog2(long v)
{
v = max(v, 1);
int highestBitPosition = 63 - Long.numberOfLeadingZeros(v);
v = Long.rotateRight(v, highestBitPosition - TABLE_BITS);
int index = (int) (v & TABLE_MASK);
float result = LOG2_TABLE[index];
result += highestBitPosition;
return result;
}
private static double slowLog2(double v)
{
return Math.log(v) / Math.log(2);
}
private static double ratio(int i, int bits)
{
return Float.intBitsToFloat((127 << 23) | (i << (23 - bits)));
}
// Represents the bucket offset as created by {@link EstimatedHistogram#newOffsets()}
private final int nStripes;
private final long[] bucketOffsets;
private final int distributionPrime;
// decayingBuckets and buckets are one element longer than bucketOffsets -- the last element is values greater than the last offset
private final AtomicLongArray decayingBuckets;
private final AtomicLongArray buckets;
public static final long HALF_TIME_IN_S = 60L;
public static final double MEAN_LIFETIME_IN_S = HALF_TIME_IN_S / Math.log(2.0);
public static final long LANDMARK_RESET_INTERVAL_IN_NS = TimeUnit.MINUTES.toNanos(30L);
private final AtomicBoolean rescaling = new AtomicBoolean(false);
private volatile long decayLandmark;
// Wrapper around System.nanoTime() to simplify unit testing.
private final MonotonicClock clock;
/**
* Construct a decaying histogram with default number of buckets and without considering zeroes.
*/
public DecayingEstimatedHistogramReservoir()
{
this(DEFAULT_ZERO_CONSIDERATION, DEFAULT_BUCKET_COUNT, DEFAULT_STRIPE_COUNT, MonotonicClock.Global.approxTime);
}
/**
* Construct a decaying histogram with default number of buckets.
*
* @param considerZeroes when true, 0-value measurements in a separate bucket, otherwise they will be collected in
* same bucket as 1-value measurements
*/
public DecayingEstimatedHistogramReservoir(boolean considerZeroes)
{
this(considerZeroes, DEFAULT_BUCKET_COUNT, DEFAULT_STRIPE_COUNT, MonotonicClock.Global.approxTime);
}
/**
* Construct a decaying histogram.
*
* @param considerZeroes when true, 0-value measurements in a separate bucket, otherwise they will be collected in
* same bucket as 1-value measurements
* @param bucketCount number of buckets used to collect measured values
*/
public DecayingEstimatedHistogramReservoir(boolean considerZeroes, int bucketCount, int stripes)
{
this(considerZeroes, bucketCount, stripes, MonotonicClock.Global.approxTime);
}
@VisibleForTesting
public DecayingEstimatedHistogramReservoir(MonotonicClock clock)
{
this(DEFAULT_ZERO_CONSIDERATION, DEFAULT_BUCKET_COUNT, DEFAULT_STRIPE_COUNT, clock);
}
@VisibleForTesting
DecayingEstimatedHistogramReservoir(boolean considerZeroes, int bucketCount, int stripes, MonotonicClock clock)
{
assert bucketCount <= MAX_BUCKET_COUNT : "bucket count cannot exceed: " + MAX_BUCKET_COUNT;
if (bucketCount == DEFAULT_BUCKET_COUNT)
{
if (considerZeroes == true)
{
bucketOffsets = DEFAULT_WITH_ZERO_BUCKET_OFFSETS;
}
else
{
bucketOffsets = DEFAULT_WITHOUT_ZERO_BUCKET_OFFSETS;
}
}
else
{
bucketOffsets = EstimatedHistogram.newOffsets(bucketCount, considerZeroes);
}
nStripes = stripes;
decayingBuckets = new AtomicLongArray((bucketOffsets.length + 1) * nStripes);
buckets = new AtomicLongArray((bucketOffsets.length + 1) * nStripes);
this.clock = clock;
decayLandmark = clock.now();
int distributionPrime = 1;
for (int prime : DISTRIBUTION_PRIMES)
{
if (buckets.length() % prime != 0)
{
distributionPrime = prime;
break;
}
}
this.distributionPrime = distributionPrime;
}
/**
* Increments the count of the bucket closest to n, rounding UP.
*
* @param value the data point to add to the histogram
*/
public void update(long value)
{
long now = clock.now();
rescaleIfNeeded(now);
int index = findIndex(bucketOffsets, value);
updateBucket(decayingBuckets, index, Math.round(forwardDecayWeight(now)));
updateBucket(buckets, index, 1);
}
public void updateBucket(AtomicLongArray buckets, int index, long value)
{
int stripe = (int) (Thread.currentThread().getId() & (nStripes - 1));
buckets.addAndGet(stripedIndex(index, stripe), value);
}
public int stripedIndex(int offsetIndex, int stripe)
{
return (((offsetIndex * nStripes + stripe) * distributionPrime) % buckets.length());
}
@VisibleForTesting
public static int findIndex(long[] bucketOffsets, long value)
{
// values below zero are nonsense, but we have never failed when presented them
value = max(value, 0);
// The bucket index can be estimated using the equation Math.floor(Math.log(value) / Math.log(1.2))
// By using an integer domain we effectively squeeze multiple exponents of 1.2 into the same bucket,
// so for values > 2, we must "subtract" these exponents from the logarithm to determine which two buckets
// to consult (as our approximation otherwise produces a value that is within 1 of the true value)
int offset = (value > 2 ? 3 : 1) + (int)bucketOffsets[0];
// See DecayingEstimatedHistogramResevoirTest#showEstimationWorks and DecayingEstimatedHistogramResevoirTest#testFindIndex()
// for a runnable "proof"
//
// With this assumption, the estimate is calculated and the furthest offset from the estimation is checked
// if this bucket does not contain the value then the next one will
int firstCandidate = max(0, min(bucketOffsets.length - 1, ((int) fastLog12(value)) - offset));
return value <= bucketOffsets[firstCandidate] ? firstCandidate : firstCandidate + 1;
}
private double forwardDecayWeight(long now)
{
return Math.exp(TimeUnit.NANOSECONDS.toSeconds(now - decayLandmark) / MEAN_LIFETIME_IN_S);
}
/**
* Returns the logical number of buckets where recorded values are stored. The actual number of physical buckets
* is size() * stripeCount()
*
* This method does not return the number of recorded values as suggested by the {@link Reservoir} interface.
*
* @return the number of buckets
* @see #stripeCount()
*/
public int size()
{
return bucketOffsets.length + 1;
}
public int stripeCount()
{
return nStripes;
}
/**
* Returns a snapshot of the decaying values in this reservoir.
*
* Non-decaying reservoir will not be included in the snapshot.
*
* @return the snapshot
*/
@Override
public Snapshot getSnapshot()
{
rescaleIfNeeded();
return new EstimatedHistogramReservoirSnapshot(this);
}
@Override
public Snapshot getPercentileSnapshot()
{
rescaleIfNeeded();
return new DecayingBucketsOnlySnapshot(this);
}
/**
* @return true if this histogram has overflowed -- that is, a value larger than our largest bucket could bound was added
*/
@VisibleForTesting
boolean isOverflowed()
{
return bucketValue(bucketOffsets.length, true) > 0;
}
private long bucketValue(int index, boolean withDecay)
{
long val = 0;
AtomicLongArray bs = withDecay ? decayingBuckets : buckets;
for (int stripe = 0; stripe < nStripes; stripe++)
val += bs.get(stripedIndex(index, stripe));
return val;
}
@VisibleForTesting
long stripedBucketValue(int i, boolean withDecay)
{
return withDecay ? decayingBuckets.get(i) : buckets.get(i);
}
private void rescaleIfNeeded()
{
rescaleIfNeeded(clock.now());
}
private void rescaleIfNeeded(long now)
{
if (needRescale(now))
{
if (rescaling.compareAndSet(false, true))
{
try
{
rescale(now);
}
finally
{
decayLandmark = now;
rescaling.set(false);
}
}
}
}
private void rescale(long now)
{
// despite striping its safe to rescale each bucket individually
final double rescaleFactor = forwardDecayWeight(now);
for (int i = 0; i < decayingBuckets.length(); i++)
{
long newValue = Math.round(decayingBuckets.get(i) / rescaleFactor);
decayingBuckets.set(i, newValue);
}
}
private boolean needRescale(long now)
{
return (now - decayLandmark) > LANDMARK_RESET_INTERVAL_IN_NS;
}
@VisibleForTesting
public void clear()
{
final int bucketCount = decayingBuckets.length();
for (int i = 0; i < bucketCount; i++)
{
decayingBuckets.set(i, 0L);
buckets.set(i, 0L);
}
}
/**
* Replaces current internal values with the given one from a Snapshot. This method is NOT thread safe, values
* added at the same time to this reservoir using methods such as update may lose their data
*/
public void rebase(EstimatedHistogramReservoirSnapshot snapshot)
{
// Check bucket count (a snapshot always has one stripe so the logical bucket count is used
if (size() != snapshot.decayingBuckets.length)
{
throw new IllegalStateException("Unable to merge two DecayingEstimatedHistogramReservoirs with different bucket sizes");
}
// Check bucketOffsets
for (int i = 0; i < bucketOffsets.length; i++)
{
if (bucketOffsets[i] != snapshot.bucketOffsets[i])
{
throw new IllegalStateException("Merge is only supported with equal bucketOffsets");
}
}
this.decayLandmark = snapshot.snapshotLandmark;
for (int i = 0; i < size(); i++)
{
// set rebased values in the first stripe and clear out all other data
decayingBuckets.set(stripedIndex(i, 0), snapshot.decayingBuckets[i]);
buckets.set(stripedIndex(i, 0), snapshot.values[i]);
for (int stripe = 1; stripe < nStripes; stripe++)
{
decayingBuckets.set(stripedIndex(i, stripe), 0);
buckets.set(stripedIndex(i, stripe), 0);
}
}
}
private static abstract class AbstractSnapshot extends Snapshot
{
protected final long[] decayingBuckets;
protected final long[] bucketOffsets;
AbstractSnapshot(DecayingEstimatedHistogramReservoir reservoir)
{
int length = reservoir.size();
this.decayingBuckets = new long[length];
this.bucketOffsets = reservoir.bucketOffsets; // No need to copy, these are immutable
}
/**
* Get the estimated value at the specified quantile in the distribution.
*
* @param quantile the quantile specified as a value between 0.0 (zero) and 1.0 (one)
* @return estimated value at given quantile
* @throws IllegalStateException in case the histogram overflowed
*/
@Override
public double getValue(double quantile)
{
assert quantile >= 0 && quantile <= 1.0;
final int lastBucket = decayingBuckets.length - 1;
if (decayingBuckets[lastBucket] > 0)
{
try { throw new IllegalStateException("EstimatedHistogram overflow: " + Arrays.toString(decayingBuckets)); }
catch (IllegalStateException e) { noSpamLogger.warn("", e); }
}
final long qcount = (long) Math.ceil(count() * quantile);
if (qcount == 0)
return 0;
long elements = 0;
for (int i = 0; i < lastBucket; i++)
{
elements += decayingBuckets[i];
if (elements >= qcount)
return bucketOffsets[i];
}
return 0;
}
/**
* Return the number of registered values taking forward decay into account.
*
* @return the sum of all bucket values
*/
protected long count()
{
long sum = 0L;
for (int i = 0; i < decayingBuckets.length; i++)
sum += decayingBuckets[i];
return sum;
}
/**
* Get the estimated max-value that could have been added to this reservoir.
*
* As values are collected in variable sized buckets, the actual max value recorded in the reservoir may be less
* than the value returned.
*
* @return the largest value that could have been added to this reservoir, or Long.MAX_VALUE if the reservoir
* overflowed
*/
@Override
public long getMax()
{
final int lastBucket = decayingBuckets.length - 1;
if (decayingBuckets[lastBucket] > 0)
return Long.MAX_VALUE;
for (int i = lastBucket - 1; i >= 0; i--)
{
if (decayingBuckets[i] > 0)
return bucketOffsets[i];
}
return 0;
}
/**
* Get the estimated mean value in the distribution.
*
* @return the mean histogram value (average of bucket offsets, weighted by count)
* @throws IllegalStateException if any values were greater than the largest bucket threshold
*/
@Override
public double getMean()
{
final int lastBucket = decayingBuckets.length - 1;
if (decayingBuckets[lastBucket] > 0)
throw new IllegalStateException("Unable to compute when histogram overflowed");
long elements = 0;
long sum = 0;
for (int i = 0; i < lastBucket; i++)
{
long bCount = decayingBuckets[i];
elements += bCount;
sum += bCount * bucketOffsets[i];
}
return (double) sum / elements;
}
/**
* Get the estimated min-value that could have been added to this reservoir.
*
* As values are collected in variable sized buckets, the actual min value recorded in the reservoir may be
* higher than the value returned.
*
* @return the smallest value that could have been added to this reservoir
*/
@Override
public long getMin()
{
for (int i = 0; i < decayingBuckets.length; i++)
{
if (decayingBuckets[i] > 0)
return i == 0 ? 0 : 1 + bucketOffsets[i - 1];
}
return 0;
}
/**
* Get the estimated standard deviation of the values added to this reservoir.
*
* As values are collected in variable sized buckets, the actual deviation may be more or less than the value
* returned.
*
* @return an estimate of the standard deviation
*/
@Override
public double getStdDev()
{
final int lastBucket = decayingBuckets.length - 1;
if (decayingBuckets[lastBucket] > 0)
throw new IllegalStateException("Unable to compute when histogram overflowed");
final long count = count();
if(count <= 1)
{
return 0.0D;
}
else
{
double mean = this.getMean();
double sum = 0.0D;
for(int i = 0; i < lastBucket; ++i)
{
long value = bucketOffsets[i];
double diff = value - mean;
sum += diff * diff * decayingBuckets[i];
}
return Math.sqrt(sum / (count - 1));
}
}
@Override
public void dump(OutputStream output)
{
try (PrintWriter out = new PrintWriter(new OutputStreamWriter(output, StandardCharsets.UTF_8)))
{
int length = decayingBuckets.length;
for(int i = 0; i < length; ++i)
{
out.printf("%d%n", decayingBuckets[i]);
}
}
}
}
/**
* Represents a snapshot of the decaying histogram.
*
* The decaying buckets are copied into a snapshot array to give a consistent view for all getters. However, the
* copy is made without a write-lock and so other threads may change the buckets while the array is copied,
* probably causing a slight skew up in the quantiles and mean values.
*
* The decaying buckets will be used for quantile calculations and mean values, but the non decaying buckets will be
* exposed for calls to {@link Snapshot#getValues()}.
*/
static class EstimatedHistogramReservoirSnapshot extends AbstractSnapshot
{
private final long[] values;
private long count;
private long snapshotLandmark;
private final DecayingEstimatedHistogramReservoir reservoir;
public EstimatedHistogramReservoirSnapshot(DecayingEstimatedHistogramReservoir reservoir)
{
super(reservoir);
int length = reservoir.size();
double rescaleFactor = reservoir.forwardDecayWeight(reservoir.clock.now());
this.values = new long[length];
this.snapshotLandmark = reservoir.decayLandmark;
for (int i = 0; i < length; i++)
{
this.decayingBuckets[i] = Math.round(reservoir.bucketValue(i, true) / rescaleFactor);
this.values[i] = reservoir.bucketValue(i, false);
}
this.count = count();
this.reservoir = reservoir;
}
/**
* Will return a snapshot of the non-decaying buckets.
*
* The values returned will not be consistent with the quantile and mean values. The caller must be aware of the
* offsets created by {@link EstimatedHistogram#getBucketOffsets()} to make use of the values returned.
*
* @return a snapshot of the non-decaying buckets.
*/
public long[] getValues()
{
return values;
}
@Override
public int size()
{
return Ints.saturatedCast(count);
}
@VisibleForTesting
public long getSnapshotLandmark()
{
return snapshotLandmark;
}
@VisibleForTesting
public Range getBucketingRangeForValue(long value)
{
int index = findIndex(bucketOffsets, value);
long max = bucketOffsets[index];
long min = index == 0 ? 0 : 1 + bucketOffsets[index - 1];
return new Range(min, max);
}
/**
* Adds another DecayingEstimatedHistogramReservoir's Snapshot to this one. Both reservoirs must have same bucket definitions. This will rescale both snapshots if needed.
*
* @param other EstimatedHistogramReservoirSnapshot with identical bucket definition (offsets and length)
*/
public void add(Snapshot other)
{
if (!(other instanceof EstimatedHistogramReservoirSnapshot))
{
throw new IllegalStateException("Unable to add other types of Snapshot than another DecayingEstimatedHistogramReservoir");
}
EstimatedHistogramReservoirSnapshot snapshot = (EstimatedHistogramReservoirSnapshot) other;
if (decayingBuckets.length != snapshot.decayingBuckets.length)
{
throw new IllegalStateException("Unable to merge two DecayingEstimatedHistogramReservoirs with different bucket sizes");
}
// Check bucketOffsets
for (int i = 0; i < bucketOffsets.length; i++)
{
if (bucketOffsets[i] != snapshot.bucketOffsets[i])
{
throw new IllegalStateException("Merge is only supported with equal bucketOffsets");
}
}
// We need to rescale the reservoirs to the same landmark
if (snapshot.snapshotLandmark < snapshotLandmark)
{
rescaleArray(snapshot.decayingBuckets, (snapshotLandmark - snapshot.snapshotLandmark));
}
else if (snapshot.snapshotLandmark > snapshotLandmark)
{
rescaleArray(decayingBuckets, (snapshot.snapshotLandmark - snapshotLandmark));
this.snapshotLandmark = snapshot.snapshotLandmark;
}
// Now merge the buckets
for (int i = 0; i < snapshot.decayingBuckets.length; i++)
{
decayingBuckets[i] += snapshot.decayingBuckets[i];
values[i] += snapshot.values[i];
}
this.count += snapshot.count;
}
private void rescaleArray(long[] decayingBuckets, long landMarkDifference)
{
final double rescaleFactor = Math.exp((landMarkDifference / 1000.0) / MEAN_LIFETIME_IN_S);
for (int i = 0; i < decayingBuckets.length; i++)
{
decayingBuckets[i] = Math.round(decayingBuckets[i] / rescaleFactor);
}
}
public void rebaseReservoir()
{
this.reservoir.rebase(this);
}
}
/**
* Like {@link EstimatedHistogramReservoirSnapshot}, represents a snapshot of a given histogram reservoir.
*
* Unlike {@link EstimatedHistogramReservoirSnapshot}, this only copies and supports operations based on the
* decaying buckets from the source reservoir. (ex. percentiles, min, max) It also does not support snapshot
* merging or rebasing on the source reservoir.
*/
private static class DecayingBucketsOnlySnapshot extends AbstractSnapshot
{
private final long count;
public DecayingBucketsOnlySnapshot(DecayingEstimatedHistogramReservoir reservoir)
{
super(reservoir);
int length = reservoir.size();
double rescaleFactor = reservoir.forwardDecayWeight(reservoir.clock.now());
for (int i = 0; i < length; i++)
{
this.decayingBuckets[i] = Math.round(reservoir.bucketValue(i, true) / rescaleFactor);
}
this.count = count();
}
@Override
public long[] getValues()
{
throw new UnsupportedOperationException();
}
@Override
public int size()
{
return Ints.saturatedCast(count);
}
}
static class Range
{
public final long min;
public final long max;
public Range(long min, long max)
{
this.min = min;
this.max = max;
}
public boolean equals(Object o)
{
if (this == o) return true;
if (o == null || getClass() != o.getClass()) return false;
Range that = (Range) o;
return min == that.min &&
max == that.max;
}
public int hashCode()
{
return Objects.hash(min, max);
}
@Override
public String toString()
{
return "[" + min + ',' + max + ']';
}
}
}